Program Overview

Program Overview

The Obsuga systemu Heidenhain iTNC530 program is designed for individuals with prior programming experience in the Heidenhain system. The course is conducted in groups of up to 6 participants, with schedules arranged in consultation with all attendees. To complete the course, participants must independently generate two programs based on provided drawing documentation and execute them on a machining center. Upon completion, graduates receive a certificate of course completion.

Program Details

The program consists of the following components:

1. Panel sterowania przeznaczenie i obsuga (1 hour): Introduction to the control panel and its operation.
2. Podstawowe czynnoci obsugowe na obrabiarce (1 hour): Basic operating procedures on the machining center, including:

• Tryb pracy selection
• File operations
• Detail mounting and basing
• Simulation of machining
• Machining startup

3. Zarzdzanie programami. Import program闚 z system闚 CAM (1 hour): Program management and importing programs from CAM systems.
4. Programowanie dialogowe na obrabiarce (3 hours): Dialog programming on the machining center, including:

• Symulacja and verification of the control program
• Utilization of information on:
  • Kartezjaskiego and biegunowego contour description
  • Tool selection and definition of machining conditions
  • Programming of tool movement
  • Tool correction and compensation
  • Punktowe patterns
  • Cykli obr鏏kowych
  • SL-cykli
  • Translacji wymiarowych
  • Principles of using repetitions and subprograms

5. Uycie pomiarowej sondy pomiarowej (1 hour): Using a measuring probe to determine dimensions and the base point of a semi-finished product.
6. Zarzdzanie narzdziami (1 hour): Tool management, including definition, equipping, and measurement of correction values.
7. Samodzielna obsuga systemu Heidenhain iTNC530 (7 hours): Independent operation of the Heidenhain iTNC530 system on the machining center, including:

• Mounting and basing of details
• Measurement and setup of the object coordinate system using a measuring probe
• Execution of details on the machining center
• Equipping the tool magazine and measuring tools using a tool probe
• Independent execution of a detail based on a provided drawing

Admission Criteria

The course is designed for individuals with prior experience in programming in the Heidenhain system. Classes are conducted in groups of up to 6 participants, with schedules arranged in consultation with all attendees.

Certificate

Upon completion of the course, participants receive a certificate of course completion.