Mechanical Engineering with Enterprise Development - BEng (Hons) drafted

Program Overview

---

About this course

In this section

Associate awards

Attendance

Start dates

Teaching, Learning and Assessment

Academic profile

---

---

---

---

Associate awards

Diploma in Professional Practice DPP

Diploma in International Academic Studies DIAS

Diploma in Professional Practice International DPPI

---

---

---

---

Attendance

This course offers students Mechanical Engineering with Enterprise development. Technical knowledge and business acumen.

---

---

---

---

Start dates

September 2023

The content for each course is summarised on the relevant course page, along with an overview of the modules that make up the course.

Each course is approved by the University and meets the expectations of:

the relevant generic national Qualification Descriptor

the applicable Subject Benchmark Statement

the requirements of any professional, regulatory, statutory and accrediting bodies.

---

---

---

---

Attendance and Independent Study

As part of your course induction, you will be provided with details of the organisation and management of the course, including attendance and assessment requirements - usually in the form of a timetable. For full-time courses, the precise timetable for each semester is not confirmed until near the start date and may be subject to change in the early weeks as all courses settle into their planned patterns. For part-time courses which require attendance on particular days and times, an expectation of the days of attendance will often be included in the letter of offer. A course handbook is also made available.

Courses comprise modules for which the notional effort involved is indicated by its credit rating. Each credit point represents 10 hours of student effort. Undergraduate courses typically contain 10- or 20-credit modules and postgraduate course typically 15- or 30-credit modules.

The normal study load expectation for an undergraduate full-time course of study in the standard academic year is 120 credit points. This amounts to around 36-42 hours of expected teaching and learning per week, inclusive of attendance requirements for lectures, seminars, tutorials, practical work, fieldwork or other scheduled classes, private study, and assessment. Part-time study load is the same as full-time pro-rata, with each credit point representing 10 hours of student effort.

Postgraduate Masters courses typically comprise 180 credits, taken in three semesters when studied full-time. A Postgraduate Certificate (PGCert) comprises 60 credits and can usually be completed on a part-time basis in one year. A 120-credit Postgraduate Diploma (PGDip) can usually be completed on a part-time basis in two years.

Class contact times vary by course and type of module. Typically, for a module predominantly delivered through lectures you can expect at least 3 contact hours per week (lectures/seminars/tutorials). Laboratory classes often require a greater intensity of attendance in blocks. Some modules may combine lecture and laboratory. The precise model will depend on the course you apply for and may be subject to change from year to year for quality or enhancement reasons. Prospective students will be consulted about any significant changes.

---

---

---

---

Assessment

Assessment methods vary and are defined explicitly in each module. Assessment can be via one method or a combination e.g. examination and coursework . Assessment is designed to assess your achievement of the module’s stated learning outcomes. You can expect to receive timely feedback on all coursework assessment. The precise assessment will depend on the module and may be subject to change from year to year for quality or enhancement reasons. You will be consulted about any significant changes.

Coursework can take many forms, for example: essay, report, seminar paper, test, presentation, dissertation, design, artefacts, portfolio, journal, group work. The precise form and combination of assessment will depend on the course you apply for and the module. Details will be made available in advance through induction, the course handbook, the module specification and the assessment timetable. The details are subject to change from year to year for quality or enhancement reasons. You will be consulted about any significant changes.

Normally, a module will have four learning outcomes, and no more than two items of assessment. An item of assessment can comprise more than one task. The notional workload and the equivalence across types of assessment is standardised.

---

---

---

---

Calculation of the Final Award

The class of Honours awarded in Bachelor’s degrees is usually determined by calculation of an aggregate mark based on performance across the modules at Levels 5 and 6 (which correspond to the second and third year of full-time attendance).

Level 6 modules contribute 70% of the aggregate mark and Level 5 contributes 30% to the calculation of the class of the award. Classification of integrated Masters degrees with Honours include a Level 7 component. The calculation in this case is: 50% Level 7, 30% Level 6, 20% Level 5. At least half the Level 5 modules must be studied at the University for Level 5 to be included in the calculation of the class.

All other qualifications have an overall grade determined by results in modules from the final level of study. In Masters degrees of more than 200 credit points the final 120 points usually determine the overall grading.

Figures correct for academic year 2019-2020.

---

---

---

---

Academic profile

The University employs over 1,000 suitably qualified and experienced academic staff - 59% have PhDs in their subject field and many have professional body recognition.

Courses are taught by staff who are Professors (25%), Readers, Senior Lecturers (20%) or Lecturers (55%).

We require most academic staff to be qualified to teach in higher education: 82% hold either Postgraduate Certificates in Higher Education Practice or higher. Most academic staff (81%) are accredited fellows of the Higher Education Academy (HEA) by Advanced HE - the university sector professional body for teaching and learning. Many academic and technical staff hold other professional body designations related to their subject or scholarly practice.

The profiles of many academic staff can be found on the University’s departmental websites and give a detailed insight into the range of staffing and expertise.  The precise staffing for a course will depend on the department(s) involved and the availability and management of staff.  This is subject to change annually and is confirmed in the timetable issued at the start of the course.

Occasionally, teaching may be supplemented by suitably qualified part-time staff (usually qualified researchers) and specialist guest lecturers. In these cases, all staff are inducted, mostly through our staff development programme ‘First Steps to Teaching’. In some cases, usually for provision in one of our out-centres, Recognised University Teachers are involved, supported by the University in suitable professional development for teaching.

Figures correct for academic year 2021-2022.

Program Outline

Careers & opportunities

In this section

1. Career options

---

Career options

Job prospects in a wide range of engineering industries are excellent with the majority of graduates finding professional employment within six months of graduation. Graduates with BEng Hons, first class or upper second class award all satisfy the requirements for a wide range of postgraduate research posts and scholarships.

---

Modules

Here is a guide to the subjects studied on this course.

Courses are continually reviewed to take advantage of new teaching approaches and developments in research, industry and the professions. Please be aware that modules may change for your year of entry. The exact modules available and their order may vary depending on course updates, staff availability, timetabling and student demand. Please contact the course team for the most up to date module list.

In this section

1. Year one
2. Year two
3. Year three
4. Year four

---

Year one

---

Principles of Management

Year: 1

Status: C

This module introduces the fundamental concepts of management and cognate topics, including the business environment, business ethics, motivation, problem solving and decision making, planning, human resource management, organisational structure, change and innovation, and operations and quality.

Students will acquire an understanding of the issues and challenges facing managers in both domestic and global environments.

---

Foundations of Entrepreneurship

Year: 1

Status: C

The purpose of this module is to provide students with an understanding of the array of issues, which must be considered in relation to entrepreneurship. The module specifically provides students with understanding of the key principles and concepts of entrepreneurship to allow further learning of this strategically important area in the future.

In particular, this module will allow students to be become critical and reflect on their own entrepreneurial traits to allow greater evidence of entrepreneurial adventure in graduate careers and/or intrapreneurship within corporate settings.

---

Mathematics for Engineering I

Year: 1

Status: C

This module provides students with a solid foundation in the fundamental topics in engineering mathematics. The material develops the student's competencies in the essential mathematics that forms an integral part of an undergraduate honours degree in engineering related disciplines.

---

Circuit Analysis I

Year: 1

Status: C

This module provides an introduction to the key electronic components, the basic concepts of electronic circuit design and the basic principles of electronic circuit testing and measurement taking. This module introduces the student to analogue electronics principles presented using a combination of lectures, tutorials and practical laboratories and are assessed using continuous assessment in the form of a class test and lab practical assessments.

---

Design and CAD I

Year: 1

Status: C

This module includes freehand sketching, systems of projection, drawing conventions,

dimensioning and tolerancing, 3-D digital modelling of parts and assemblies, design

documentation, an introduction to the total design activity, formulation of a product design

specification (PDS), material selection and manufacturing considerations in design

---

Manufacturing Processes

Year: 1

Status: C

A module which integrates formal study with a significant practical programme for the understanding and application of common manufacturing processes.

---

Year two

---

New Venture Creation

Year: 2

Status: C

This module provides students with an opportunity to develop potential new ventures to the point of product/service launch. The overall aim of this module is to engage students in the process of new venture creation and to develop the range of skills required for dealing with the practical elements of innovation and enterprise activities.

---

The Business Plan

Year: 2

Status: C

The module provides students with an opportunity to develop business enterprise skills through team working on an entrepreneurial business proposal. It takes an 'action learning' approach and is 'student-driven'.

---

Professional Development

Year: 2

Status: C

This module is designed to equip students with the appropriate research and transferable skills needed to secure employment within the Computing and Engineering domain.

The module prepares students for professional work by developing knowledge of the responsibilities and obligations of employees, employers and clients as determined by codes of professional conduct. Students will have the opportunity to practise the presentation of themselves in, for example, application forms, curriculum vitae, interview, elevator pitches and aptitude tests.

The module provides an underpinning foundation of research concepts, methods and techniques necessary for project development and delivery. The students employ research skills developed during the module to gather research from a variety of sources and critically review this literature. Embedded in all these activities is the reinforcement of the need for adhering to recognised ethical standards and taking a professional approach to employability.

---

Engineering of Control Systems and Signals

Year: 2

Status: C

This level 5 module will endow engineering students with the knowledge and skills to analyse and design control systems and signal processing systems.

---

Materials

Year: 2

Status: C

The module provides a general coverage of different classes of engineering materials. Metallic and non-metallic materials are studied with respect to structures, properties, and processing.

---

Design and CAE 2

Year: 2

Status: C

The module considers creativity in design; product innovation; technical and non-technical

aspects of design; safety and product liability; design analysis techniques for economic

product manufacture and assembly; functional analysis; value engineering; safety and

reliability through design projects; manufacturing processes; assembly techniques; material

handling methods; component and product inspection and testing; factory simulation using

computer techniques; computer database application for manufacturing management and

processing; and design applications using 3-D computer graphics

---

Manufacturing Technology

Year: 2

Status: C

This module covers major aspects of manufacturing technology including state-of-the-art for subtractive, additive, casting, and deformation processes. In addition, the module covers the technologies implemented in the integration of various manufacturing processes, thereby promoting a comprehensive understanding of manufacturing systems.

---

Year three

---

International Academic Studies

Status: O

Year: 3

This module is optional

This module provides an opportunity to undertake an extended period of study outside the UK and Republic of Ireland. Students will develop an enhanced understanding of the academic discipline whilst generating educational and cultural networks.

---

Placement - Magee Engineering

Status: O

Year: 3

This module is optional

This module is a year's paid industrial placement programmed to complement the undergraduate engineer's academic studies. The student will be employed as a junior engineer to enable improvement in their understanding of the work environment and development of their transferable, communication and personal skills. The experience will enhance their engineering ability, maturity and eventual employability.

This module provides undergraduate students with an opportunity to gain structured and professional work experience, in a work-based learning environment, as part of their planned programme of study. This experience allows students to develop, refine and reflect on their key personal and professional skills. The placement should significantly support the development of the student's employability skills, preparation for final year and enhance their employability journey.

---

Year four

---

Entrepreneurship and innovation

Year: 4

Status: C

This module aims to equip students with a knowledge and understanding of entrepreneurial and innovation processes, and their relationship with business and economic development. It will enable students to develop the skills necessary to participate in business venturing projects. Assessment is by coursework and examination

---

Managing the Digital Enterprise

Year: 4

Status: C

This module considers the impact of E-Business and Information Systems on established business practices and strategies. It evaluates the latest developments in Information Technology and places them in the context of the marketplace. It considers the impact of IT on organisational structure and consumer behaviour in a comparative international context.

---

Final Year Project

Year: 4

Status: C

Students are required to undertake a major project during the final year of the course. The module offers students an opportunity to develop a realistic and meaningful piece of work during their final year. This module allows a chosen subject area to be researched in depth and a solution developed as a consequence. Students will have the opportunity to integrate and apply the learning achieved from other modules in the course. The module runs during both semesters and allows students to develop a comprehensive approach to all aspects of working on a large project. The project encourages innovation and creative thinking in the development of the solution. It also develops the entrepreneurial mindset, which can influence the challenges undertaken and final decisions made.

---

Design and CAE 3

Year: 4

Status: C

This module is based on the execution of an industrially generated major design project

through multi-disciplinary team activity involving aspects of: project management, market

analysis, specification, concept design, budget costing, decision making, detail design,

production planning, manufacturing requirements and product costing.

---

Computer Aided Engineering

Year: 4

Status: C

This module provides a practical, hands-on treatment of Computer Aided Engineering in the

context of application in design practice or manufacturing company. It majors on the more

advanced part modelling techniques, assembly modelling, good modelling practice,

collaboration and interoperabilty, design documentation, 3D printing, surface modelling

rendering, mechanism simulation and Finite Element Analysis. It involves the utilisation of an

integrated, state-of-the-art MCAD suite along with the teaching of the general principles of

these technologies.